Battery for the Xiaomi Viomi S9 Lydsto R1 Roidmi EVE robot vacuum cleaner H18650CH-4S2P 5200 mAh battery

If you encounter a problem with your robot vacuum cleaner:

• switches off during operation;
• does not complete cleaning completely and returns to the charging station prematurely;
• does not turn on or does not start cleaning after being fully charged;
• gives errors related to the battery or power supply.

Most likely, the old battery has reached the end of its service life and requires replacement.

Our battery is ideal for replacing the original battery in the following robot vacuum cleaner models:

• Viomi S9, S9 UV, S9 Alpha UV, VXVC11, VXVC12, VXVC13, VXVC14, VXVC15, 1A, 1C, 1X, Alpha 2 Pro, D800, X2
  
• Lydsto G2, R1, R1 Pro, S1, S1 Pro, W2, R1DA, R1A, R1D, L1, HS1
  
• Neabot S600, X500, X520, X600, X600 Pro
  
• Proscenic  M6, M6 Pro, M7 Max, M7 LDS, M7 Pro, M8 Pro, LDS M7 Pro, M7 LDS, U6
  
• Roidmi EVE, Eve Plus, G1, G1M, R7, W2
  
• Kyvol Cybovac E30, S31
  
• Lenovo LR1, T1 Pro
  
• Arnagar S8 Pro, S9
  
• UONI V980 Max, V980 Plus, V980 Pro
  
• Philips FC8972 , IMILAB V1 , Haier TAB-T530S , Garlyn SR-800 Max

Compatible part numbers:

RW-XL4S2P-5200ARP, VXVC07-JG, 1С605EUW, STYTJOX, CMSDJ707A, 4INR19/66-2, INR18650 M26-4S2P, H18650CH-4S2P, CMICR18650F8M7-4S2P, SUN-INTE-181, S631-148-18650, CS-PCM710VX

These RoyalWatt batteries are manufactured using high-quality 18650 Li-Ion cells, which are characterized by high reliability, stable performance, and a long service life . For safe operation, each battery is equipped with a dedicated BMS board that provides protection against short circuits, overcharge, overdischarge, overheating, and overload.

Replacing a battery at home is very easy! All you need to do is:

1. Turn the robot vacuum cleaner over and unscrew the screws on the bottom cover.
2. Remove the bottom cover of the housing.
3. Disconnect the old battery and remove it.
4. Connect the new RoyalWatt battery to the vacuum cleaner socket.
5. Replace the cover and tighten the screws.

After installing a new battery, it is recommended to leave the robot vacuum cleaner on the charging station for 3-4 hours. This will allow the system to correctly determine the battery parameters and display the correct charge level.

For our store customers only:

• a wide range of freshly produced products;
• minimum and current prices;
• impeccable quality;
• prompt delivery.